Remote Control Commands
R&S
®
NGP800
114
User Manual 5601.5610.02 ─ 04
<numeric value>
Numeric value for upper safety limit.
MIN | MINimum
Min value for upper safety limit.
MAX | MAXimum
Max value for upper safety limit.
Range:
0.000E+00 to 6.4050E+01
Increment: 0.001
*RST:
6.450E+01
Parameters for setting and query:
<Channel list>
<list>
Example:
VOLT:ALIM:UPP? (@1)
Queries the upper safety limit for voltage at channel 1.
Example:
See
Example "Configuring the safety limit"
[SOURce:]CURRent[:LEVel][:IMMediate]:ALIMit:LOWer
<New value for current>[,
<Channel list>]
[SOURce:]CURRent[:LEVel][:IMMediate]:ALIMit:LOWer?
[<Channel list>]
Sets or queries the lower safety limit for current.
Setting parameters:
<current>
<numeric value> | MIN | MINimum | MAX | MAXimum
<numeric value>
Numeric value for lower safety limit.
MIN | MINimum
Min value for lower safety limit.
MAX | MAXimum
Max value for lower safety limit.
Range:
For up to 32V: 0.0005E+00 to 20.0100E+00. For up
to 64V: 0.0005E+00 to 10.0100E+00
Increment: 0.0005
*RST:
0.0005E+00
Parameters for setting and query:
<Channel list>
<list>
Example:
CURR:ALIM:LOW? (@1)
Queries the lower safety limit for current at channel 1.
Example:
See
Example "Configuring the safety limit"
Configuration Commands
www.allice.de
Allice Messtechnik GmbH
