Preparing for use
R&S
®
ENV216
16
User Manual 5201.6693.14 ─ 05
2. Disconnect the auxiliary protective ground connection of the R&S
ENV216.
4.2
Connecting to protective ground
Before the R&S
ENV216 is put into operation, the network must be connected to an
additional conductor that is compliant with VDE0100.
Users must be aware that it is possible for socket connections and grounding conduc-
tors to become disconnected. A further grounding conductor with adequate diameter
must be connected between a grounding conductor connection for the measurement
area and the grounding bolt (1) on the R&S
ENV216.
4.3
Connecting to power
Connection to the mains power supply is provided by a permanently attached mains
cable.
Connecting to power
