Remote Control
R&S
®
NRT2
109
User Manual 1178.5550.02 ─ 04
Example:
*TST?
Query
0
Response: Passed
Example:
*TST?
Query
1
Response: Failed
Usage:
Query only
*WAI
WAIt to continue
Prevents the execution of the subsequent commands until all preceding commands
have been executed and all signals have settled.
Usage:
Event
*XESE
<xese>
This command specifies the standard event status enable register (ESE). This register
determines which events from the standard event status register (ESR) are summar-
ized in bit 5 (the event summary bit ESB) of the status byte.
Parameters:
<xese>
<expr>
*XESR?
This command reads the standard event status register (ESR). This command causes
the register to be cleared.
Return values:
<xesr>
<expr>
Usage:
Query only
*XPRE
<xpre>
This command reads/writes the parallel pll enable register (PRE).
Parameters:
<xpre>
<expr>
Parallel poll enable register.
Common Commands
