Remote Control
R&S
®
NRT2
104
User Manual 1178.5550.02 ─ 04
*DEV
[<instrument_no>]
This command returns the selected "instrument" of the device. The command can be
used to select between different "instruments" in a multichannel device.
Parameters:
<instrument_no>
The assigned instrument.
*DMC
<Label>, <Macro>
*DMC?
<Label>
Defines a macro command.
Parameters:
<Macro>
Parameters for setting and query:
<Label>
*EMC
<Enable>
Enables macro command.
Parameters:
<Enable>
*ESE
<register>
Event Status Enable
Sets the event status enable register to the specified value. The query returns the con-
tents of the event status enable register in decimal form.
Parameters:
<register>
Range:
0 to 255
*RST:
0
*ESR?
Event Status Read query
Returns the contents of the event status register in decimal form (0 to 255) and subse-
quently sets the register to zero.
Usage:
Query only
*GCLS
Clears all status information in all internal "instruments".
Usage:
Event
Common Commands
