Rohde & Schwarz 1424.7805K02, User Manual

Page: 492 / 530

Remote control basics
R&S
®
NRX
492 User Manual 1178.5566.02 ─ 09
14.4.8.5 Operation trigger extended status registers
The
CONDition
registers contain information whether a measurement channel is wait-
ing for a trigger event. The
EVENt
registers contain information whether a measure-
ment channel has been waiting for a trigger event since the last query.
For information on index m, see Chapter 14.4.1, "Hierarchy of the status registers" ,
on page 476.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Extension Summary
Measurement m+1 wait for trigger
Measurement m+2 wait for trigger
Measurement m+3 wait for trigger
Measurement m+4 wait for trigger
Measurement m+5 wait for trigger
Measurement m+6 wait for trigger
Measurement m+7 wait for trigger
Measurement m+8 wait for trigger
0
0
0
0
0
0
0
+
Figure 14-14: Operation trigger extended status registers
Querying the register:
●
STATus:OPERation:TRIGger:EXTension<RegisterIndex>:CONDition?
●
STATus:OPERation:TRIGger:EXTension<RegisterIndex>[:SUMMary][:
EVENt]?
Table 14-16: Used operation trigger extended status bits and their meaning
Bit no. Short description Bit is set if a measurement channel is waiting for trigger
event or for the extension summary.
0 Extension summary Sum bit of the next lower status register.
1 Measurement m+1 wait for trigger Channel 1
2 Measurement m+2 wait for trigger Channel 2
3 Measurement m+3 wait for trigger Channel 3
4 Measurement m+4 wait for trigger Channel 4
5 Measurement m+5 wait for trigger Channel 5
6 Measurement m+6 wait for trigger Channel 6
Status reporting system