Rohde & Schwarz 1424.7805K02, User Manual

Page: 210 / 530

Remote control commands
R&S
®
NRX
210 User Manual 1178.5566.02 ─ 09
Parameters:
<value> Range: 0.0 to 1e18
*RST: 2.0
Default unit: -
Manual operation: See "Scale Upper Limit" on page 56
See "Forward Scale Upper Limit, Reflection Scale Upper Limit"
on page 56
CALCulate<Measurement>:METer<DirectionalChannel>:UPPer[:DATA]:RATio[:
VALue] <value>
Sets the upper limit for the power ratio bargraph display.
If you enter a value without unit, the unit is defined by
UNIT<Measurement>:POWer:
RATio
. For further information, see Chapter 13.6.1.3, "Units" , on page 217.
Suffix:
<Measurement>
.
1 to 8
Measurement
<DirectionalChannel> 1 to 2
1 = primary sensor, 2 = secondary sensor or 1 = forward, 2 =
reflection (reverse)
Parameters:
<value> Range: -180.0 to +180.0
*RST: +20.0
Default unit: dB
Manual operation: See "Scale Upper Limit" on page 56
See "Forward Scale Upper Limit, Reflection Scale Upper Limit"
on page 56
CALCulate<Measurement>:METer<DirectionalChannel>:UPPer[:DATA][:POWer]
<value>
Sets the upper limit for the power value bargraph display.
If you enter a value without unit, the unit is defined by
UNIT<Measurement>:
POWer[:VALue]
. For further information, see Chapter 13.6.1.3, "Units" , on page 217.
Suffix:
<Measurement>
.
1 to 8
Measurement
<DirectionalChannel> 1 to 2
1 = primary sensor, 2 = secondary sensor or 1 = forward, 2 =
reflection (reverse)
Parameters:
<value> Range: -120.0 to +150.0
*RST: +10.0
Default unit: dBm
Measurement settings and results