Remote control commands
R&S
®
NRX
186
User Manual 1178.5566.02 ─ 09
Triggers a self-test of the R&S NRX and outputs the result.
0
indicates that no errors
have occurred.
Usage:
Query only
*WAI
Wait to continue
Prevents the execution of the subsequent commands until all preceding commands
have been executed and all signals have settled.
Usage:
Event
*XESE
<xese>
Specifies the standard event status enable register (ESE). This register determines
which events from the standard event status register (ESR) are summarized in bit 5
(the event summary bit ESB) of the status byte.
Parameters:
<xese>
<expr>
*XESR?
Reads and clears the standard event status register (ESR).
Return values:
<xesr>
<expr>
Usage:
Query only
*XPRE
<xpre>
Reads or writes the parallel pll enable register (PRE).
Parameters:
<xpre>
<expr>
Parallel poll enable register.
*XSRE
<xsre>
Reads or writes the service request enable register. Used to enable service requests.
Parameters:
<xsre>
<expr>
Service request enable register (SRE).
Common commands
