Rohde & Schwarz 1424.7805.02, User Manual, Page: 486 / 522

Remote Control Basics
R&S
®
NRX
486 User Manual 1178.5566.02 ─ 08
Table 15-16: Used operation trigger extended status bits and their meaning
Bit no. Short description Bit is set if a measurement channel is waiting for trigger
event or for the extension summary.
0 Extension summary Sum bit of the next lower status register.
1 Measurement m+1 wait for trigger Channel 1
2 Measurement m+2 wait for trigger Channel 2
3 Measurement m+3 wait for trigger Channel 3
4 Measurement m+4 wait for trigger Channel 4
5 Measurement m+5 wait for trigger Channel 5
6 Measurement m+6 wait for trigger Channel 6
7 Measurement m+7 wait for trigger Channel 7
8 Measurement m+8 wait for trigger Channel 8
15.4.8.6 Operation Sense Status Register
The
CONDition
register contains information whether a power sensor is being initial-
ized. The
EVENt
register contains information whether an initialization was started or
completed since the last query.
A power sensor is initialized if:
●
Supply voltage is switched on (power-up).
●
Sensor was connected.
●
Reset was performed,
*RST
or
SYSTem:PRESet
.
Status Reporting System
www.allice.de Allice Messtechnik GmbH