Preparing for use
R&S
®
AMN6500
15
User Manual 1352.1213.02 ─ 01
Disconnect the R&S
AMN6500 from the mains supply.
2. Disconnect the auxiliary protective ground connection of the R&S
AMN6500.
4.2
Connecting to protective ground
Before the R&S
AMN6500 is put into operation, the network must be connected to an
additional conductor that is compliant with VDE0100.
Users must be aware that it is possible for socket connections and grounding conduc-
tors to become disconnected. A further grounding conductor with adequate diameter
must be connected between a grounding conductor connection for the measurement
area and the grounding bolt (1) on the R&S
AMN6500.
1
4.3
Connecting to power
Connection to the mains power supply is provided by a permanently attached mains
cable.
The device is not equipped with an ON / OFF switch. Instead, the device plug of the
connecting cable serves for disconnection from the AC supply (see
Connecting to power
