Rohde & Schwarz 1332.4500.22, User Manual

Page: 924 / 1476

Command Reference
R&S
®
ZNA
924 User Manual 1178.6462.02 ─ 12
Parameters for setting and query:
<CircuitModel> SL | SC
Possible circuit models (character data); see
Table 8-7 .
Example: *RST; :CALC:TRAN:VNET:GLO:DEEM:PAR:R? SC; R? SL
Query the default resistances for ground loop deembedding. The
response is 10000000; 0.
CALC:TRAN:VNET:GLO:DEEM:PAR:R SC, 2.2E+3
Increase the resistance for the Shunt C model to 2.2 kΩ.
Manual operation: See "Network" on page 588
CALCulate<Ch>:TRANsform:VNETworks:GLOop:DEEMbedding<group>:
TNDefinition <CircuitModel>
Selects the circuit model for ground loop deembedding.
Suffix:
<Ch>
.
Channel number.
<group> Port group (DUT) number.
If multiple port groups are configured (see
SOURce<Ch>:
GROup<Grp>:PPORts
) and
CALCulate<Ch>:TRANsform:
VNETworks:GLOop:GROup
is
ON
, then each port group can
have its own de-/embedding models.
Parameters:
<CircuitModel> FIMPort | SL | SC | SG
Possible circuit models (character data); see
Circuit models for
ground loop port embedding/deembedding .
Example: See
CALCulate<Ch>:TRANsform:VNETworks:GLOop:
DEEMbedding<group>[:STATe]
on page 921
Manual operation: See "Network" on page 588
CALCulate<Ch>:TRANsform:VNETworks:GLOop:EMBedding<group>[:STATe]
<Boolean>
Enables or disables the embedding function for ground loops. It is allowed to change
the circuit model and its parameters while embedding is enabled.
Suffix:
<Ch>
.
Channel number.
<group> Port group (DUT) number.
If multiple port groups are configured (see
SOURce<Ch>:
GROup<Grp>:PPORts
) and
CALCulate<Ch>:TRANsform:
VNETworks:GLOop:GROup
is
ON
, then each port group can
have its own de-/embedding models.
SCPI Command Reference