
Command Reference
R&S
®
ZNA
865
User Manual 1178.6462.02 ─ 12
CALCulate<Ch>:PARameter:DELete:CALL
Deletes all traces in channel no.
<Ch>
.
Suffix:
<Ch>
.
Channel number
Example:
See
CALCulate<Ch>:PARameter:DELete
Usage:
Event
Manual operation:
See
CALCulate<Ch>:PARameter:DELete:CMEMory
Deletes all memory traces in channel <Ch>.
Suffix:
<Ch>
.
Channel number
Usage:
Event
CALCulate<Ch>:PARameter:DELete:SGRoup
Deletes a group of logical ports (S-parameter group), previously defined via
CALCulate<Ch>:PARameter:DEFine:SGRoup
.
Suffix:
<Ch>
.
Channel number.
<Ch>
may be used to reference a previously
defined channel. If
<Ch>
does not exist, it is generated with
default channel settings.
Example:
See
CALCulate<Ch>:PARameter:DEFine:SGRoup
Usage:
Event
CALCulate<Ch>:PARameter:MEASure
<TraceName>, <Result>
Assigns a measurement result to an
existing
trace. The query returns the result
assigned to the specified trace (no second parameter; see example).
Note:
To create a new trace and at the same time assign the attributes, use
CALCulate<Ch>:PARameter:SDEFine
. To display the trace, create a diagram
ON
) and assign the trace to this diagram
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:FEED
); see example below.
Traces must be selected to become active traces; see
CALCulate<Ch>:PARameter:CATalog?
returns a list of all defined traces.
You can open the "Trace Manager" dialog to obtain an overview of all channels and
traces, including the traces that are not displayed.
Suffix:
<Ch>
.
Channel number of an existing channel containing the refer-
enced trace.
SCPI Command Reference