manualshive.com logo in svg

Rohde & Schwarz 1330.5000K04, Getting Started

Share
Download
Rohde & Schwarz 1330.5000K04 Getting Started Download Page 87

Operating the Instrument

R&S

®

FSVA3000/R&S

®

FSV3000

87

Getting Started 1330.8073.02 ─ 07

Label

Information

CF

Center frequency

Span

Frequency span (frequency domain display)

ms/

Time per division (time domain display)

Pts

Number of sweep points or (rounded) number of currently displayed points

in zoom mode

7.1.5

 

Instrument and Status Information

Global instrument settings and functions, the instrument status and any irregulari-
ties are indicated in the status bar beneath the diagram.

In the MultiView tab, the status bar always displays the information for the cur-
rently selected measurement.

The following information is displayed:

Instrument status

The instrument is configured for operation with an external reference.

Progress

The progress of the current operation is displayed in the status bar.

In the MultiView tab, the progress bar indicates the status of the currently
selected measurement, not the measurement a Sequencer is currently per-
forming, for example.

Date and time

The date and time settings of the instrument are displayed in the status bar.

Understanding the Display Information

Summary of Contents for 1330.5000K04






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands