Operating the Instrument
R&S
®
FSPN
75
Getting Started 1179.4370.02 ─ 01
Key name
(upper inscription)
Series of (special) characters and number provided
.
. * : _ , ; " ' ? ( ) #
–
<toggles between capital and small letters>
6.5
Displaying Results
The results of a measurement channel can be evaluated in many different ways,
both graphically and numerically. For each evaluation method the results are dis-
played in a separate window in the tab.
The R&S
FSPN allows you to configure the display to suit your specific require-
ments and optimize analysis.
6.5.1
Activating and Deactivating Channels
When you activate an application, a new measurement channel is created which
determines the measurement settings for that application. The same application
can be activated with different measurement settings by creating several chan-
nels for the same application. Whenever you switch channels, the corresponding
measurement settings are restored. Each channel is displayed in a separate tab
on the screen.
An additional tab ("MultiView") provides an overview of all currently active chan-
nels at once.
Only one measurement can be performed at any time, namely the one in the cur-
rently active channel. However, in order to perform the configured measurements
consecutively, a Sequencer function is provided.
Displaying Results
