Remote Commands
R&S
®
Spectrum Rider FPH
484
User Manual 1321.1011.02 ─ 11
OFF
Keep user calibration after a preset.
*RST:
OFF
Example:
SYST:PRES:CAL:DISC ON
Discards user calibration after a preset.
SYSTem:PRESet:FACTory
This command initiates an instrument reset back to factory settings.
This command is an event and therefore has no query and no *RST value.
Example:
SYST:PRES:FACT
Resets the R&S Spectrum Rider to its factory settings.
Usage:
Event
SYSTem:PRESet:MODE
<Mode>
This command selects the preset mode.
Parameters:
<Mode>
DEFault | USER
DEFault
Default preset state.
USER
User defined preset state.
Example:
SYST:PRES:MODE USER
Selects a user defined preset.
SYSTem:PRESet:USER
<PathName>
This command selects a file containing a user defined preset state.
Parameters:
<PathName>
Filename of the user defined preset state.
SYSTem:REBoot
This command initiates a reboot of the R&S Spectrum Rider.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:REB
Restarts the R&S Spectrum Rider.
Usage:
Event
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
