Remote Commands
R&S
®
Spectrum Rider FPH
483
User Manual 1321.1011.02 ─ 11
Example:
SYST:LANG 'english'
Sets the system language to English.
SYSTem:LANGuage:CATalog?
This command lists all languages available for the user interface.
This command is a query and therefore no *RST value.
Example:
SYST:LANG:CAT?
Usage:
Query only
SYSTem:POWer:SOURce?
This command queries the current R&S Spectrum Rider power source.
This command is a query and therefore has no *RST value.
Example:
SYST:POW:SOUR?
Usage:
Query only
SYSTem:POWer:STATus?
This command queries the remaining power of the battery.
This command is a query and therefore has no *RST value.
Example:
SYST:POW:STAT?
Usage:
Query only
SYSTem:PRESet
Resets the R&S Spectrum Rider to its default state or a state defined by the user,
depending on SYSTem:PRESet:MODE.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:PRES
Usage:
Event
SYSTem:PRESet:CALibration:DISCard
<Disc>
This command turns the mechanism that discards or keeps user calibration after a pre-
set on and off.
Parameters:
<Disc>
ON | OFF
ON
Discards user calibration after a preset.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
