Remote Commands
R&S
®
Spectrum Rider FPH
418
User Manual 1321.1011.02 ─ 11
Suffix:
<1...2>
.
1...2
Parameters:
<Frequency>
<numeric value>
Default unit: Hz/symbol
Example:
CALC:MARK:FUNC:DDEM:CFDR?
Query carrier frequency drift.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:CFERror[:RESult]?
This command queries the carrier frequency error of the measured signal.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<Frequency>
<numeric value>
Default unit: Hz
Example:
CALC:MARK:FUNC:DDEM:CFER?
Query carrier frequency error.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MDEPth[:RESult]?
This command queries the modulation depth of the measured signal.
Prerequisites for this command: Select ASK demodulation
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<ModIndex>
<numeric value>
Default unit: PCT
Example:
CALC:MARK:FUNC:DDEM:MDEP?
Query modulation depth.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MDEViation[:RESult]?
This command queries the frequency deviation of the measured signal.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
