Remote Commands
R&S
®
Spectrum Rider FPH
400
User Manual 1321.1011.02 ─ 11
MPEak
-Peak value
MIDDle
-
±
Peak value
/
2
RMS
RMS value
Example:
CALC:MARK:FUNC:ADEM:AM RMS
Reads out the RMS value for AM.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:ADEMod:FM[:RESult]?
<MeasType>
This command displays the results of frequency deviation for FM.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<MeasType>
PPEak | MPEak | MIDDle | RMS
PPEak
+Peak value
MPEak
-Peak value
MIDDle
-
±
Peak value
/
2
RMS
RMS value
Example:
CALC:MARK:FUNC:ADEM:FM RMS
Reads out the RMS value for FM.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:ADEMod:MDEPth[:RESult]?
This command queries the modulation depth for the AM.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Example:
CALC:MARK:FUNC:ADEM:MDEP?
Reads out the modulation depth value for AM.
Usage:
Query only
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
