Receiver Mode
R&S
®
Spectrum Rider FPH
286
User Manual 1321.1011.02 ─ 11
Figure 12-1: Frequency scan measurement
1 = Operating mode
2 =
3 =
4 = Marker
5 = Refresh button to refresh peak hold power level of the receiver frequency
6 = Upper limit threshold indicator
7 = Lower limit threshold indicator
8 = Scan results
9 =
10 = Receiver softkey menu
While scanning, the R&S Spectrum Rider indicates the current measured frequency
with a triangle icon, at the x-axis of the measurement diagram.
Selecting the trace style
The trace style defines the way the trace looks.
1. Press [TRACE] key.
2. Select "Trace Style" softkey.
The R&S Spectrum Rider opens a submenu that contains the trace style for selec-
tion.
3. Select the trace style you prefer from the menu.
The R&S Spectrum Rider provides two trace styles in receiver mode.
●
"Lines"
The "Lines" trace style shows a vertical line for each receive frequency as descri-
bed above.
●
"Polygon"
Selecting the Measurement Mode
www.allice.de
Allice Messtechnik GmbH
