manualshive.com logo in svg

Rohde & Schwarz 1321.0615.02, User Manual

Share
Download
Rohde & Schwarz 1321.0615.02 User Manual Download Page 250

Modulation Analysis

R&S

®

Spectrum Rider FPH

243

User Manual 1321.1011.02 ─ 11

2. Select "FM Domain" softkey

3. Press [AMPT] key

4. Press the "Dev per Division" softkey.

A drop-down menu to select the step interval on the frequency deviation opens.

5. Select the step interval on the frequency deviation you require.

Scale Adjustment

The scale adjustment is only available in the "FM Domain" of "Mod Trace" measure-
ment.

1. Press [BW] key.

2. Select "Scale Adjust" softkey.

The R&S Spectrum Rider performs an auto adjustment on the vertical axis in the
FM Domain of "Mod Trace" measurement.

RF Attenuation

For more information, see 

Chapter 6.2.3.5, "Setting the RF Attenuation"

, 

on page 179.

Preamplifier

For more information, see 

Chapter 6.2.3.6, "Using the Preamplifier"

, 

on page 181.

10.1.3.4

 

Defining Demodulation Bandwidth and Audio Lowpass Filter

Demodulation Bandwidth

The demodulation bandwidth defines the useful bandwidth used in the modulated sig-
nals.

1. Press [BW] key.

2. Select "Manual DBW" softkey.

The R&S Spectrum Rider opens an input field to select the demodulation band-
width.

3. Rotate the rotary knob to select the demodulation bandwidth you require.

See 

Chapter 10.1.1, "Demodulation Bandwidth"

, 

on page 238 and 

Table 10-2

.

Reference Deviation

The reference deviation is available only in the FM domain, the maximum of reference
deviation setting is (demodulation bandwidth) /2.

1. Press [BW] key.

2. Select "Reference Deviation" softkey.

The R&S Spectrum Rider opens an input field to select the reference deviation.

Analog Demodulation

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 1321.0615.02






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands