Using the Internal Power Meter
R&S
®
Spectrum Rider FPH
224
User Manual 1321.1011.02 ─ 11
8
Using the Internal Power Meter
R&S Spectrum Rider option
R&S FPH-K19 (order number: 1321.0721.02) option is required to operate the R&S
Spectrum Rider in the internal power mode.
With the installation of internal power meter option, the R&S Spectrum Rider also sup-
ports power measurements without using a power sensor. In that case, you can con-
nect the DUT directly to the R&S Spectrum Rider and still perform accurate channel
power measurements.
Test setup
Connect the DUT to the RF input shown below:
Measuring the power
1. Press [MODE] key.
2. Select "Power Meter" softkey.
The R&S Spectrum Rider switches its operating mode and shows the measured
power level in dBm.
www.allice.de
Allice Messtechnik GmbH
