Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
200
User Manual 1321.1011.02 ─ 11
10. Enter the lower limit.
11. Confirm the entry with one of the unit keys.
12. Define the upper search limit the same way for "Search Range 1" section item.
13. Define the lower and upper search limit the same way for "Search Range 2" sec-
tion item.
14. Select "Search Range 1" or "Search Range 2" section item.
The R&S Spectrum Rider activates the selected search range limit of the selected
marker.
15. To perform auto update of new search peak in the
enable the "Marker Tracking" checkbox in the "Set Marker" softkey.
Deactivating marker search limits
1. Press "Selected Marker" softkey.
2. Select the "Search Range Off" menu item.
3. Confirm the selection by pressing the rotary knob.
The R&S Spectrum Rider turns off the marker search limit function for the selected
marker.
4. To turn off the marker search limits function for all markers, select "All Markers"
softkey and repeat the above steps
6.2.7.8
Using Marker Functions
In addition to the frequency and level readout, the R&S Spectrum Rider provides sev-
eral, more complex, marker functions in spectrum analyzer mode.
Configuring Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
