Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
199
User Manual 1321.1011.02 ─ 11
2. Select "Delete Marker" softkey.
3. Select the "Delete All" menu item.
4. Confirm the selection by pressing the rotary knob.
The R&S Spectrum Rider deletes all markers and delta markers.
Special touchscreen gesture
Alternatively, draw an "x" on the trace window to delete all markers and delta markers
on the trace window.
See
Chapter 4.2.6, "Delete All Markers"
6.2.7.7
Using Marker Search Limits
The R&S Spectrum Rider allows you to use only a limited section of the trace for the
"Set to Peak", "Set to Next Peak" and "Minimum" functions.
1. Press [MARKER] key.
2. Select "Set Marker" softkey.
3. Select the "Search Range" menu item.
The R&S Spectrum Rider opens the marker search limits softkey menu.
4. Select "Select Marker" to define the marker position.
The R&S Spectrum Rider opens an input field to define the marker position.
5. Enter a desire marker position.
6. Confirm the entry with one of the unit keys.
7. Select "Selected Marker" if you want to apply the marker search limit on the
selected marker.
The R&S Spectrum Rider displays the "Selected Marker" menu.
8. Select the "Search Range Off" menu item.
The R&S Spectrum Rider activates the marker search limits for the selected
marker.
By default, the search limit range is over the whole span.
9. Select the "Lower Limit" menu item from "Search Range 1" section item.
The R&S Spectrum Rider opens an input field to define the lower limit of the search
range for "Search Range 1" section item.
Configuring Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
