Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
147
User Manual 1321.1011.02 ─ 11
4. Select the desired channel input field to change the limit.
5. Enter the limit value you need.
6. Select the channel checkbox to activate the channel limit.
7. Select "Done" to apply the changes.
The R&S Spectrum Rider applies the limit checks on the ACLR measurement.
8. To deactivate the limit check for a specific channel, select the desired channel
checkbox to deactivate it.
Performing a limit check
1. Select "Channel Settings" softkey.
The R&S Spectrum Rider opens a submenu to select the channel settings.
2. Select the checkbox for "Check Channel Limits" menu item.
The R&S Spectrum Rider automatically performs limit checks.
The results of the limit check are displayed in the
result fails the limit check, the power level reading turns red and has an asterisk (*)
in front of its power level.
6.1.6.7
Configuring and Triggering the Sweep
For more information on setting the sweep, see
Chapter 6.2.5.1, "Setting the Sweep
on page 184 in frequency domain.
Equipped with option R&S Spectrum Rider-K57 (order number: 1321.1586.02) , you
can now peform gated trigger measurement. For more information on the trigger func-
tionality, see
Chapter 6.2.5.3, "Working with Trigger Functionality"
quency domain.
6.1.6.8
Using a Trigger
For more information on using external trigger to trigger measurements, see
Performing Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
