manualshive.com logo in svg

Rohde & Schwarz 1312.8000K08, Getting Started, Page: 13 / 123

Share
Download
Rohde & Schwarz 1312.8000K08 Getting Started Download Page 13

Documentation Overview

R&S

®

FSW

13

Getting Started 1338.4102.02 ─ 08

All user manuals are also available for download or for immediate display on the
Internet.

2.3

 

Service Manual

Describes the performance test for checking the rated specifications, module
replacement and repair, firmware update, troubleshooting and fault elimination,
and contains mechanical drawings and spare part lists.

The service manual is available for registered users on the global
Rohde

 

&

 

Schwarz information system (GLORIS):

https://gloris.rohde-schwarz.com

2.4

 

Instrument Security Procedures

Deals with security issues when working with the R&S

 

FSW in secure areas. It is

available for download on the Internet.

2.5

 

Printed Safety Instructions

Provides safety information in many languages. The printed document is deliv-
ered with the product.

2.6

 

Data Sheets and Brochures

The data sheet contains the technical specifications of the R&S

 

FSW. It also lists

the firmware applications and their order numbers, and optional accessories.

The brochure provides an overview of the instrument and deals with the specific
characteristics.

See 

www.rohde-schwarz.com/brochure-datasheet/FSW

Data Sheets and Brochures

Summary of Contents for 1312.8000K08




























































































































Reviews:

No comments