Command Reference
R&S
®
ZNB/ZNBT
1267
User Manual 1173.9163.02 ─ 53
<Driver>
Generator type (string parameter). The generator type is identi-
cal with the name of the generator driver file (
*.gen
) stored in
the resources\extdev subdirectory of the analyzer's program
directory. Type the driver file name as shown in the "Add Exter-
nal Generator" dialog, i.e. without the file extension "
.gen
"
(example: use '
sme02
', if the corresponding driver file name is
sme02.gen
).
Alternative:
The '
<driver>
' string may also contain the gener-
ator driver file name with its complete path, e.g. '
C:\Program
Files\Rohde-Schwarz\Vector Network
Analyzer\ZNB\resources\extdev\sme02.gen
'.
<Interface>
Interface type (string parameter):
'GPIB0'
,
'VXI-11'
,
'socket'
,
'usb-visa'
,
'other'
...
<Address>
Interface address (string parameter), depending on the interface
type. See
Chapter 6.17.4.4, "External Generators Dialog"
<FastSweep>
ON | OFF
Optional Boolean parameter, enables or disables the fast sweep
mode.
<ExtReference>
ON | OFF
Optional Boolean parameter, sets the analyzer to internal (OFF)
or external (ON) reference frequency.
Example:
SYST:COMM:RDEV:GEN1:DEF 'Ext. Gen. 1', 'SME02',
'gpib0', '21'
Configure an R&S SME02 generator as external generator no.
1, assigning the name "Ext. Gen. 1" and a GPIB address 21.
SYST:COMM:RDEV:GEN1:DEF?
Query the generator configuration. The response
'Ext. Gen.
1','SME02','GPIB0','21',OFF, OFF
indicates that the
fast sweep mode is disabled and that the analyzer is set to inter-
nal reference frequency.
SYST:COMM:RDEV:GEN1:DEL
Clear the generator configuration table.
SYST:COMM:RDEV:GEN1:DEF?
Query the generator configuration. The analyzer returns an error
message because the generator no. 1 is no longer configured.
Manual operation:
See
SYSTem:COMMunicate:RDEVice:GENerator:DELete
Clears the configuration table for external generators.
Example:
See
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:
Usage:
Event
SCPI Command Reference
