Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 269 / 813

R&S
®
ZVA/ZVB/ZVT Trace Menu
1145.1084.12 4.107 E-6
Remote control:
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:CENTer
Start = Marker
Sets the beginning (start) of the sweep range equal to the stimulus value of the active marker, leaving
the end (stop) value unchanged. The active marker appears at the left edge of the diagram.
Remote control: CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:STARt
Stop = Marker
Sets the end (stop) of the sweep range equal to the stimulus value of the active marker, leaving the
beginning (start) unchanged. The active marker appears at the right edge of the diagram.
Remote control: CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:STOP
Span = Marker
Sets the span of the sweep range equal to the absolute value of the first coordinate of the active delta
marker, i.e. to the difference between the delta marker and the reference marker positions. The function
is available only if the active marker is in Delta Mode. The reference marker appears at the right, the
delta marker at the left edge of the diagram or vice versa, depending on which of the two markers has
the smaller stimulus value.
Ref. Value = Marker
Sets the reference value equal to the response value of the active marker, leaving the values of the
vertical divisions (Scale Div.) unchanged.
Max = Marker
Sets the upper edge of the diagram equal to the response value of the active marker, leaving the values
of the vertical divisions (Scale Div.) unchanged.
Min = Marker
Sets the lower edge of the diagram equal to the response value of the active marker, leaving the values
of the vertical divisions (Scale Div.) unchanged.