manualshive.com logo in svg

Rohde & Schwarz 1141.2005.02, Quick Start Manual, Page: 2 / 144

Share
Download
Rohde & Schwarz 1141.2005.02 Quick Start Manual Download Page 2

This document describes the R&S

®

SMU200A, stock no. 1141.2005.02 and its options.

The firmware of the instrument makes use of several valuable open source software packages. The most important of them together
with their corresponding open source license and the verbatim license texts are provided on the user documentation CD-ROM (included
in delivery).
The OpenSSL Project for use in the OpenSSL Toolkit (

http://www.openssl.org/

) includes cryptographic software written by Eric Young

([email protected]) and software written by Tim Hudson ([email protected]).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.

© 2011 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
E-mail: 

[email protected]

Internet: 

http://www.rohde-schwarz.com

Printed in Germany – Subject to change – Data without tolerance limits is not binding.
R&S

®

 is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

The following abbreviations are used throughout this manual: R&S

®

SMU200A is abbreviated as R&S SMU.

Summary of Contents for 1141.2005.02

















































































































































Reviews:

No comments