![Rohde & Schwarz 1125.5555.02 Operating Manual Download Page 288](http://html.mh-extra.com/html/rohde-and-schwarz/1125-5555-02/1125-5555-02_operating-manual_1477925288.webp)
SMIQ
Digital Standard 3GPP W-CDMA (FDD)
1125.5555.03
E-9
2.219
Parameter DPCCH + DPDCH mode:
DPCCH settings
POWER
0 dB
TIMING OFFSET
4 (fix)
TFCI STATE
OFF
TFCI
0
FBI MODE
OFF
FBI
ALL 0
FBI PATTERN
"0000 0000 0000 0000"
MISUSE TPC...
OFF
TPC POWER STEP
0 dB
PREAMBLE POWER
0 dB
PREAMBLE POWER STEP
0 dB
DATA PART POWER
0 dB
CONTROL PART POWER
0 dB
SHARED RESOURCE...
OFF
MESSAGE PART LENGTH
1
DPDCH settings
OVERALL SYMBOL RATE
30 ksps
POWER
0 dB
DATA
PN15 (for all DPDCHs)
2.14.3
Background Information for the Generation of 3GPP W-CDMA Signals
This section provides some background information on W-CDMA signals to support the user in
generating signals with certain characteristics.
2.14.3.1 3GPP W-CDMA Signals in Time Domain
For information on 3GPP W-CDMA signals in the frequency domain refer to section 2.14.3.2.
Downlink
The two spreading methods for SCHs and the remaining (downlink) channel types are explained for the
channels P-CCPCH, P-SCH and S-SCH. (These three channels were referred to as “Perch” in previous
versions of the W-CDMA standard and option SMIQB45)
A (downlink) signal containing the following components is generated:
•
P-CCPCH (-20 dB)
•
P-SCH (-14 dB)
•
S-SCH (-14 dB)
The SCH components are generated with double amplitude for better distinction against PCCPCH.
Sequence length = 1
Filtering:
root cosine (roll-off = 0.22), impulse length = 32, oversampling = 8
Data source: PRBS23
No superimposed impairments active