THE BASICS
8
There are five ways to arm your system:
THE TOUCHPAD
There are two ways to arm your system using
the Touchpad:
i) Security Status Display (Top-Left Corner)
• Tap (Note – it will say
Disarmed as your system is currently disarmed)
• Select the arm mode (Stay/Night/Away)
• Enter your personal 4-digit access code on the KeyPad
• You’ll have 60 seconds before your system is armed.
You can exit your home during this time.
ii) Security Touchpad App
• Tap app
• Select the arm mode you prefer (Stay/Night/Away)
• Enter your personal 4-digit access code on the KeyPad
• You’ll have 60 seconds before your system is armed.
You can exit your home during this time.
Note –
The default exit delays are 120 seconds for
Arm Stay and Arm Night, and 60 seconds
for Arm Away.
DISARMED – PRESS TO ARM
SECURITY
1
Arming Your
System
Arm Stay
– When you’re home and moving about the
home, but want your alarm on. In Arm Stay mode the
motion detector is OFF, but the entry delay is ON.
Arm Night
– When you’re heading to bed and aren’t
expecting anyone to enter the house. This mode allows
movement throughout the house because the motion
detector is OFF and the entry delay is OFF (i.e. alarm will
sound immediately if an outside door or window is opened).
Arm Away
– When you’re leaving the home and no one
will be at home. In Arm Away mode the motion detector is
ON and the entry delay is ON.
Note –
Arm Away is the default mode. If Arm Away is
selected but no entry/exit door is exited, the system
will revert to Arm Stay as you haven’t left the home.
There are THREE ARM MODES:
1
2
3
