During your workout, if you find the running belt is not running smoothly, that means the motor belt is loosing,
please follow the below steps to adjust the motor belt tension:
1.
Open the motor cover and loosen 4 x 64# bolts using 6# Allen Bolt.
2.
Turn the motor belt adjustment bolt using an 6# Allen wrench 1/4 turn in a clockwise direction.
3.
Re-Start the treadmill and run on the treadmill; if the running belt is still not working properly, repeat the
above step.
4.
Please do not make the motor belt too tight; if the belt is over tightened it will overload the treadmill and
reduce the motors life.
5.
After the motor belt tightened, fasten the 4 x 64# bolts and then assemble the motor cover.
Care and Maintenance
Motor Belt Tension Adjustment
26
