RUD-2 v2.0 EN Rev. A.doc
2012-08-03
[2]
C o n s t r u c t i o n a n d U s a g e
RUD-2 is a miniature reader for EM 125 kHz proximity transponders. The reader is
supplied from serial USB port which is also used for communication with the device. The
RUD-2 can be used as card enroll reader for access control system or any other
application which requires card reader. Card can be enrolled straight from the PR Master
(version 4.4.8 is required) or using dedicated
Roger MiniReader 1.1.3
application. For
programmers who want to integrate RUD-2 with their systems the dynamic library DLL is
available.
F u n c t i o n a l D e s c r i p t i o n
The RUD-2 can be used in three different scenarios:
as a reader for card enrolling to the RACS access system,
as a reader for card enrolling through
Roger MiniReader
application,
as a reader used in third party applications using a DLL library provided.
W o r k i n g w i t h P R M a s t e r p r o g r a m
In the list of available readers in the PR Master 4.4.8 control program, RUD-2 readers
connected to the system are displayed. When reading a new card into the system or
modifying a card which had been enrolled earlier, you can use any device displayed in
the list, including the RUD-2 reader.
W o r k i n g w i t h R o g e r M i n i R e a d e r p r o g r a m
The
Roger MiniReader
displays the list of available USB readers connected to the PC. In
order to read a single card, you need to select the
Read single card
command, and then
put a card close to the reader. When the code is read, it automatically appears in the
Card codes window
. The fact of card reading is signaled acoustically however this feature
can be possibly disabled using relevant program’s options (see:
Options
). If you use the
Read multiple cards
command, program will read cards in a loop and insert them to the
