2
3
UK
Thanks,
|
for selecting the Rodger bedwetting alarm
It is our experience that you will be successful by using this bedwetting alarm correctly.
Please read all instructions before using the bedwetting alarm.
•
The Rodger bedwetting system is suitable for children over the age of 5 years.
•
When beginning the therapy, be motivated, relaxed and confident.
•
Perform the alarm test so you and your child will become familiar with the operation
and sound of the bedwetting alarm. Repeat this before your child goes to sleep.
•
Make no contest of the therapy. This will cause stress and is counterproductive.
•
Place the bedwetting alarm a certain distance from the bed, so your child has to get
out of bed to switch off the alarm.
•
Give your child an occasional reward. A small present is a nice positive reinforcement
that your child is doing well.
•
Use the Rodger bedwetting system every night until there have been no “wet beds”
for 14 consecutive nights.
•
Successful treatment with the Rodger bedwetting system takes from a few weeks to
a few months. Persistence is the key to success.
•
Do your best to use the alarm every night without interruption.
•
If your child’s bedwetting condition does not improve within 3 months, visit your
doctor to rule out any medical conditions.
•
Do not start the therapy if important events will take place soon, i.e. moving the
family or the birth of a child.
•
Do not wake your child at night to go to the toilet.
•
Never punish your child; your child is not responsible for occasional accidents.
•
Do not prohibit your child from drinking before going to bed. Drinking less does not
decrease the likelihood of bedwetting. However, it is preferable that your child does not
drink coffee, tea, or beverages containing carbonation or chocolate before going to bed.
•
In the early days of the treatment, a child who is a heavy sleeper might not wake up.
You could choose another sound of the alarm. Another good solution could be to
sleep next to your child and help your child to wake up as soon as the alarm sounds.
Make sure that your child stops the alarm and goes to the toilet. In time, your child
will “tune in” and do this more independently.
•
If relapse occurs, another short course will usually succeed. Store all parts together
for future use. Remove battery before storing.
Installation bedwetting alarm
•
Place the plug in the receiver.
•
Plug the receiver into an electrical outlet and switch it on by pressing the central LED
button
(A)
, which will light up green.
Pairing the transmitter and second receiver:
•
Plug the receiver into an electrical outlet and switch it on by pressing the central LED
button
(A)
, which will light up green.
•
Press the – and + buttons
(B + C)
simultaneously for 3 seconds.
•
The central LED button
(A)
will start blinking green: within 1 minute you have to
connect the two push-buttons of the transmitter with the metal strip
(F)
of the
receiver. The transmitter and receiver are paired when the LED lights up green and
the receiver gives a sound.
Alarm test:
•
Make sure that the receiver is switched on and volume is adjusted (+ button
(C)
).
•
Connect the two push-buttons of the transmitter with the metal strip
(F)
on the
receiver. This will cause the alarm to sound and the LED
(A)
will start blinking red.
•
The alarm can be turned off by pushing the central LED button
(A)
.
Setting alarm sounds:
|
For each alarm to make the same sound:
Select the sound of your choice by pressing the SELECT- button
(D)
. The last selected
sound will be heard every time the alarm goes off.
To test the sound, connect the two push-buttons of the transmitter with the metal
strip
(F)
of the receiver. This will cause the alarm to sound and the LED
(A)
will start
blinking red.
|
For each alarm to make a different sound:
Press the AUTO-button
(E)
. With each alarm 1 of the 8 available sounds will be heard.
|
Range:
The range of the receiver and the transmitter is maximum 30 meters (100 feet) in open
air. Inside buildings, the range could be less than 30 meters (100 feet).
