Roda RD10 HB, Manual

Page: 37 / 53

RD10 HB Manual
Page 37
Information (no input possible)
4 OSD Menu
Please note
: Pressing “Enter” and “right” buttons will reset the OSD settings to factory values.
Press any OSD menu button to enter OSD main menu. The sub menus can be selected with the “left” and
“right” buttons. Press “Enter” to select any sub menu, press “Esc” to leave the sub menu. So exit the main
menu press “Esc”.
Please note
: The OSD menu will close itself automatically if there were no inputs for approx. 20 sec-
onds.
To save adjusted values the “Save Mode” function must be executed.
Main menu and sub menu key functions:
• Select sub menus

left/right buttons
• Confirm selection

Enter button
• Exit menu

Escape button
Adjust or toggle values with the left/right buttons.
4.1 Setup
Function Description
PS_Source Select PS Source:
DVI, VGA (RGB)
PS_Output Select PS output format:
All timings of timing table

VGA_60, SVGA_60,...
Table 12: OSD Setup
4.2 Information (no input possible)
Function Description
Display Single / dual, Format, i.e. RGB.
Display type, i.e. DIS-2