Mounting
Mount the sight to the bow in one of three positions with
the bow mounting screws provided. Set the length of the
sight by loosening the set screw on the dovetail bracket.
Slide to desired position (6 possible) and tighten set screw.
Sighting In
(20 yards recommended)
Set the top pin in the preferred position in the bezel
(using the hex key provided). Next, unlock the Tool Free
Locking Knobs, allowing the Micro Adjust Windage and
Elevation Dials to rotate. Rotate the Micro Adjust Windage
and Elevation Dials to precisely tune pin placement.
Once pins are in the desired location, lock the Tool Free
Locking Knobs.
* Move pins in the same direction of desired arrow
placement.
i.e. If missing left, adjust pins left. If missing low,
move pins down.
ROCK SOLID DEPENDABILITY
ROCK SOLID FEATURES
Micro Adjust Windage and Elevation Dials
The Micro Adjust Windage and Elevation Dials allow
the shooter to make small, consistent, and accurate
adjustments as needed. They are also useful tools for
precision sight in.
2nd and 3rd Axis Adjustments
Designed to further accommodate shooters sight
alignment preferences.
2nd Axis Adjustment
Loosen/Tighten screws to
adjust the 2nd axis of the sight.
3rd Axis Adjustment
Loosen/Tighten screw and pivot the level
to adjust the 3rd axis of the sight.
Built in light adapter
Use light adapter port to mount an optional light
for use in low light situations. Designed to only
illuminate the pins, keeping the target
sharp in the shooters eye.
AL
ALUMINUM BUILT
Windage Dial
The laser etched Windage Dial precisely
adjusts the pins left and right.
(clockwise moves pins left,counter clockwise moves pins right)
Elevation Dial
The laser etched Elevation Dial
precisely adjusts the pins up and
down. (clockwise moves pins down,
counter clockwise moves pins up)
