background image

9

belt&disc sander 

 en

accessOries

45

o

 Miter gauge 

 

1

Allen key   

2

Spanner   

1

Disc sanding sheet 

 

1

Sanding belt 

1

We recommend that you purchase your accessories 

from the same store that sold you the tool. Use good 

quality accessories marked with a well-known brand 

name. Choose the type according to the work you 

intend to undertake. Refer to the accessory packaging 

for further details. Store personnel can assist you and 
offer advice.

saFety instrUctiOns

 

 

warning:  

When using electric tools basic safety 

precautions should always be followed to reduce 

the risk of fire, electric shock and personal injury 

including the following.

Read all these instructions before attempting to operate 

this product and save these instructions.

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person 

responsible for their safety.

saFe OPeratiOn

1.  Keep work area clear

  Cluttered areas and benches invite injuries.

2.   Consider work area environment

  Do not expose tools to rain.

  Do not use tools in damp or wet locations.

  Keep work area well lit.

  Do not use tools in the presence of flammable 

liquids or gases.

3.  Guard against electric shock

  Avoid body contact with earthed or grounded 

surfaces {e.g. pipes, radiators, ranges, 

refrigerators).

4.  Keep other persons away

    Do not let persons, especially children, not involved 

in the work touch the tool or the extension cord and 

keep them away from the work area.

5.  Store idle tools

   When not in use, tools should be stored in a dry 

locked-up place, out of reach of children.

6.   Do not force the tool

    It will do the job better and safer at the rate for which 

it was intended.

7.  Use the right tool

  Do not force small tools to do the job of a heavy duty 

tool.

  Do not use tools for purposes not intended; for 

example do not use circular saws to cut tree limbs 

or logs.

8.  Dress properly

  Do not wear loose clothing or jewellery, they can be 

caught in moving parts.

  Non-skid footwear is recommended when working 

outdoors.

  Wear protective hair covering to contain long hair.

9.  Use protective equipment

  Use safety glasses.

  Use face or dust mask if working operations create 

dust.

10. Connect dust extraction equipment

  If the tool is provided for the connection of dust 

extraction and collecting equipment, ensure these 

are connected and properly used.

11.  Do not abuse the cord

  Never yank the cord to disconnect it from the socket 

Keep the cord away from heat, oil and sharp edges.

12. Secure work

  Where possible use damps or a vice to hold the 

work. It is safer than using your hand.

13. Do not overreach

  Keep proper footing and balance at all times.

14. Maintain tools with care

  Keep cutting tools sharp and clean for better and 

safer performance.

  Follow instruction for lubricating and changing 

accessories.

  Inspect tool cords periodically and if damaged have 

them repaired by an authorized service facility.

  Inspect extension cords periodically and replace if 

damaged.

  Keep handles dry, clean and free from oil and 

grease.

15.  Disconnect tools

  When not in use, before servicing and when 

changing accessories such as grinding wheels, 

disconnect tools from the power supply.

16. Remove adjusting keys and wrenches

  Form the habit of checking to see that keys and 

adjusting wrenches are removed from the tool 

Summary of Contents for ShopSeries RS8151

















Reviews: