BEFORE YOU BEGIN
Check the thickness of the door. The product will work with a door thickness of 1-3/8" - 1-3/4" only.
Note
If your door is pre-bored, go to Step 1 for deadbolt installation. If your door is not pre-bored, go to
Step 2 and 3 for preparing the door for strike.
The deadbolt for this handleset has an adjustable backset. The deadbolts are preset to a 2-3/8" backset.
Only adjust the deadbolts if your door is prebored to a 2-3/4" backset.
PART IDENTIFICATION
1. Adjustable deadbolt
2. Combo screws
3. Flat head wood screws
4. Strike
5. Key
6. Key cylinder
7. Cylinder collar
8. Turnpiece mounting plate
9. 2" Pan head machine screws
10. Turnpiece trim
11. 1/2" Oval head machine screws
2
EXPLODED VIEW
3
(2) DEADBOLT MOUNTING SCREW
#10-32 x 2"
(2) COMBO SCREW
#8 x 3/4"
(2) 1-1/4" WOOD SCREW
#10 x 1-1/4"
INSTALLATION FASTENERS
(2) 1/2" OVAL HEAD ACHINE SCREWS
#8 X 1/2"
4
5
6
7
8
9
10
11
1
TOOLS REQUIRED:
ADDITIONAL TOOLS IF DOOR IS NOT PRE-BORED:
• Phillips screwdriver
or power screwdriver
• Center punch
• 1/8" drill bit
• 3/8" drill bit
• 7/8" spade bit
• Wood chisel
• 2-1/8" hole saw
• 1" spade bit
• Drill
ENTRY DOOR SINGLE CYLINDER DEADBOLT
INSTALLATION INSTRUCTIONS
TM
Rockwell
