manualshive.com logo in svg

Rockwell Automation PowerFlex 40, Installation Instructions Manual

Share
Download
Rockwell Automation PowerFlex 40 Installation Instructions Manual Download Page 11

PowerFlex 40 Standard Configured Drive Standard Features and Options

1-3

Publication 23B-IN001G

Communication Options

DeviceNet (Position 12, Code D)

The DeviceNet option is drive mounted and consists of the DeviceNet 
communication adaptor (22-COMM-D) and adaptor cover (22B-CCB for 
frame B drives or 22B-CCC for frame C drives). When DeviceNet is 
present, no other communication option is available other than the HIM. 
When used as a slave, the HIM will have limited functionality. For details 
related to the DeviceNet option, refer to the PowerFlex DeviceNet Adapter 
User Manual, publication 22COMM-UM003….

To review this schematic see 

Figure 2.1 on page 2-2

 and 

Figure 2.3 on page 2-4

.

EtherNet/IP (Position 12, Code E)

The EtherNet/IP option is drive mounted and consists of the EtherNet/IP 
communication adaptor (22-COMM-E) and adaptor cover (22B-CCB for 
frame B drives or 22B-CCC for frame C drives). When EtherNet/IP is 
present, no other communications option is available other than the HIM. 
When used as a slave, the HIM will have limited functionality. For details 
related to the EtherNet/IP option, refer to the PowerFlex EtherNet/IP 
Adapter User Manual, publication 22COMM-UM004….

To review this schematic see 

Figure 2.1 on page 2-2

 and 

Figure 2.3 on page 2-4

.

PROFIBUS (Position 12, Code P)

The PROFIBUS option is drive mounted and consists of the PROFIBUS 
communication adaptor (22-COMM-P) and adaptor cover (22B-CCB for 
frame B drives or 22B-CCC for frame C drives). When PROFIBUS is 
present, no other communication option is available other than the HIM. 
When used as a slave, the HIM will have limited functionality. For details 
related to PROFIBUS option, refer to the PowerFlex PROFIBUS Adapter 
User Manual, publication 22COMM-UM005….

To review this schematic see 

Figure 2.1 on page 2-2

 and 

Figure 2.3 on page 2-4

.

ControlNet (Position 12, Code C)

The ControlNet option is drive mounted and consists of the ControlNet 
communication adaptor (22-COMM-C) and adaptor cover (22B-CCB for 
frame B drives or 22B-CCC for frame C drives). When ControlNet is 
present, no other communication option is available other than the HIM. 
When used as a slave, the HIM will have limited functionality. For details 
related to ControlNet option, refer to the PowerFlex ControlNet Adapter 
User Manual, publication 22COMM-UM006….

To review this schematic see 

Figure 2.1 on page 2-2

 and 

Figure 2.3 on page 2-4

.

Summary of Contents for PowerFlex 40































































Reviews:

No comments

Brands by name

Popular brands

Load more brands