8
Rockwell Automation Publication 750-IN115B-EN-P - March 2020
PowerFlex 755T Frames 5 and 6 EMC C2 Filter Kits
15. To secure the front plate to the conduit box, insert and tighten the M6 x 12 mm Torx screw in the hole on the front of the conduit box.
16. Secure the new EMC C2 drive cover that is supplied with the kit to the chassis as shown in
.
17. Secure the existing control-pod access cover to the chassis as shown in
18. Place the debris hood on the top of the chassis and tighten the four M5 captive Phillips screws.
15
M6 x 12 mm
T30
9.0 N
•
m (80 lb
•
in)
18
M5 (Captive)
P2
3.6 N•m (32 lb•in)
