Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 33 / 104

Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019 33
Operate the Terminal Chapter 3
The MobileView VESA® mounting bracket (Cat. No. 2711T-VMBRACKET)
connects to the back of the MobileView terminal, so the terminal can be
mounted, stored, and locked into the bracket. This bracket is when locked
storage is preferred.
The mounting bracket ships with a cutout template, publication 2711T-DS003 ,
for installation.
Use suitable flat-head screws (not shipped with product) to mount the bracket.
TIP The lock handle turns when lifted for easier movement of its locking pin. When
you use the lock handle, verify that it locks flush against the bracket surface. If
not, lift and turn the lock handle slightly until it locks fully.
All dimensions are in mm (in.)
365 (14.4)
171 (6.7)
Use either location
on each side of the
bracket to lock the
MobileView terminal
to the bracket.
453 (17.8)
161 (6.3)
Lock Handle