Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 29 / 104

Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019 29
Operate the Terminal Chapter 3
The 22-pin MobileView Connection Cable
The 22-pin connection cable connects a second generation MobileView 2711T
terminal to an IP65 junction box. The connection cable is 5, 10, or 15 meters
(16.4, 32.8, or 49.2 feet) long. This cable withstands water, cleaning agents,
motor oil, drilling oils, grease, lubricants, and condensates that contain
hydrochloric acid.
MobileView
Terminal Connection Cable
PCB Connector
Connector
No.
Connector
Pin No.
S1 Cable
Pin No.
Cable
Wire Color Signal Description
S1,
Power and Safety
Connection S2 1 10 pink 24V DC
2 9 black GND_IN
3 7 brown E-stop, circuit 2 (+)
4 22 white-green E-stop, circuit 2 (-)
5 6 gray E-stop, circuit 1 (+)
6 19 red-blue E-stop, circuit 1 (-)
7 18 green-brown Enabling switch, circuit 1 (+)
8 20 yellow Enabling switch, circuit 1 (–)
9 8 green Enabling switch, circuit 2 (+)
10 21 gray-pink Enabling switch, circuit 2 (–)
ETH,
Communication
Interface S3 1
(1)
(1) Shielded.
1 blue TD+ (transmit)
2
(1)
2 orange TD- (transmit)
3
(1)
3 white RD+ (receive)
6
(1)
4 red RD- (receive)
S2,
Illuminated
Push Button S4 2 11 violet E-stop, illuminated (+)
4 12 white-pink E-stop, illuminated (–)
1 5 white Semi-wireless jumper
3 14 blue Semi-wireless jumper
5 13 white-blue Box ID
—
15 Li1 Bridge
16 Li1 Bridge
17 —
Not used
50 mm ±2 (2 in. ±0.08)
10 mm ±2 (0.4 in. ±0.08)
60 mm ±3 (2.4 in. ±0.12)
5, 10, or 15 m
(16.4, 32.8, or 49.2 ft)
Connection Cable
S1 (cable connector)
S1 Pins Detail
S2
S2 Detail
S4
S3
40 mm ±3
(1.6 in. ±0.12)
1
11
9
7
5
3
1
12
10
8
6
4
2
3
4
6
7
9
10
12
13
15
16
17
18 19
20
21
22
11
8
5
14
2