Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 28 / 104

28 Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019
Chapter 3 Operate the Terminal
The 20-pin MobileView Connection Cable
The 20-pin connection cable connects a first generation MobileView 2711T
terminal to an IP20 junction box. The connection cable is 5, 10, or 15 meters
(16.4, 32.8, or 49.2 feet) long. This cable withstands water, cleaning agents,
motor oil, drilling oils, grease, lubricants, and condensates that contain
hydrochloric acid.
ATTENTION: For the IP20 junction box terminals (X1…X4) listed in the
following table, see Figure 3 on page 36 .
2711T
MobileView
Terminal Connection Cable IP20 Junction Box
PCB Connector
Connector
No.
Connector
Pin No.
S1
Cable
Pin
No.
Cable
Wire Color
Junction
Box
Input
(X4) Signal Description
Junction
Box Output
S1,
Power and Safety
Connection S2 1 1 pink 1 24V DC X1, #1
2 2 black 2 GND_IN X1, #2
3 3 brown 3 E-stop, circuit 2 (+) X1, #3
4 4 white-green 4 E-stop, circuit 2 (-) X1, #4
5 5 gray 5 E-stop, circuit 1 (+) X1, #5
6 6 red-blue 6 E-stop, circuit 1 (-) X1, #6
7 7 green-brown 7 Enabling switch, circuit 1 (+) X1, #7
8 8 yellow 8 Enabling switch, circuit 1 (-) X1, #8
9 9 green 9 Enabling switch, circuit 2 (+) X1, #9
10 10 gray-pink 10 Enabling switch, circuit 2 (-) X1, #10
11, 12 11 — 11 Not used —
ETH,
Communication
Interface S3 1
(1)
13 blue 13 TD+ (transmit) X3, #1
2
(1)
14 orange 14 TD- (transmit) X3, #2
3
(1)
15 white 15 RD+ (receive) X3, #3
6
(1)
16 red 16 RD- (receive) X3, #6
S2,
Push Button or
Key Switch
Connection S4 1 12 violet 12 External 1 X2, #1
2 17 white-pink 17 External 2 X2, #2
3 18 white 18 External 3 X2, #3
4 19 blue 19 External 4 X2, #4
5 20 white-blue 20 Not used —
(1) Shielded.
50 mm ±2 (2 in. ±0.08)
10 mm ±2 (0.4 in. ±0.08)
60 mm ±3 (2.4 in. ±0.12)
40 mm ±3
(1.6 in. ±0.12)
5, 10, or 15 m
(16.4, 32.8, or 49.2 ft)
1
3
4
6
7
9
10
12
13
15
16
17
18
19
20 11
8
5
14
2
Connection Cable
S1 (cable connector)
S2
S3
S4
S2 Detail
11
9
7
5
3
1
12
10
8
6
4
2