Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 21 / 104

Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019 21
Safety Precautions and Elements Chapter 2
MobileView Junction Box
Operation MobileView IP20 and IP65 junction boxes are high-quality devices that are
equipped with state-of-the-art electronics.
ATTENTION: To avoid malfunctions or damage through improper
handling, follow these instructions during operation.
• Do not operate a junction box if the cable is damaged or pinched. To
avoid damaging the cable, do not place the cable over or around sharp
objects.
• Do not mount a junction box near heat sources and avoid direct
sunlight.
• Do not expose the a junction box to strong magnetic fields or excessive
vibrations, dust, or humidity.
• Use a soft, damp cloth with water to clean IP65 junction boxes. Do not
use solvents, scouring agents, or scrubbing sponges.
• Help prevent foreign objects or liquids from getting into a junction box.
Check the protective covers of the device regularly. Verify that all screws
are firmly tightened and that the housing and cable entrance are not
damaged.
• Turn off the power supply before you remove an IP65 junction box from
its cover plate. When the back plate is removed, the junction box is
sensitive to ESD.
• If a junction box exhibits any anomaly, have the device thoroughly and
fully tested by the manufacturer or authorized repair dealer before you
operate the junction box again.