Rockwell Automation Allen-Bradley Kinetix 6000, User Manual

Page: 46 / 268

Publication 2094-UM001A-EN-P — September 2006
46 Mounting the Kinetix 6000 Drive System
4. Hang the mounting bracket from the slot on the power rail.
5. Pivot module downward and align the guide pins on the power
rail with the guide pin holes in the back of the module.
Slots for additional axis modules,
shunt module, or slot filler.
Power Rail Slot
Mounting Bracket
Power Rail
Integrated Axis Module
Guide Pin
Holes
Power rail
(side view)
in upright
vertical position.
Integrated Axis Module
(side view)
Integrated Axis Module
(rear view)
Guide Pins
Pivot module downward
and align with guide pins.
TIP
The IAM can have two or three power rail connectors and guide
pins, the AM can have one or two, all other modules have one.