Publication CC-QS015A-EN-P - November 2009
31
System Validation and Application Tips
Chapter 2
Validate Proper Operation of the PanelView Screens
Most of the buttons are real-time signals from the MSR42 or MSR127 relays, driven via the
MicroLogix 1100 controller to the PanelView terminal. The buttons change their appearance as
the signals driving them change.
The following pages illustrate a typical sequence of PanelView screens. Confirm that the system
and PanelView screens operate as expected by following this sequence.
When you apply power to the system, the Safety System Status screen appears.
This button
Indicates
There is no load in front of the sensor.
A load is in front of the sensor.
The light curtain sensing field is not interrupted.
The light curtain sensing field is interrupted.
The E-stop has been pressed.
SEN
1
SEN
1
LC
LC
E-STOP
