44
Rockwell Automation Publication 440R-UM014D-EN-P - December 2019
Appendix B
Regulatory Approval
Machine Safety Directive
This product is designed and tested to meet the European Council Directive
2006/42/EC on machinery and the following standards:
• IEC/EN 61508
Functional safety of electrical/electronic/programmable electronic
safety-related systems
• IEC/EN 62061
Safety of machinery - Functional safety of safety-related electrical,
electronic, and programmable electronic control systems
• EN ISO 13849-1
Safety of machinery — Safety-related parts of control systems —
Part 1: General principles for design
This product is intended for use in an industrial environment.
The performance of the safety function is dependent on the structure of all
devices that comprise the safety function.
data that must be used to represent the relay when calculating the safety
integrity level (SIL) or the Performance Level (PL).
The safety relay can be used in safety circuits according to DIN EN 60204-1/
VDE 0113 part 1. The following safety requirements are achievable in
maximum based on the operation mode and wiring.
Specifications are applicable only if the safety function is demanded at least
once within six months. All diagnostic tests are conducted at least before next
demand. At mission time (TM), the proof test interval (PTI) is assumed.
Components failure rates are according to SN29500.
