18
Industrial 15" Flat Panel Monitor
Publication 6185-5.1
Note:
The adjustment utility delivered with this flat panel monitor
is designed to present the "worst case" scenario for graphic
display. It shows a range of colors and presents a pattern
you can use to ensure that the monitor is adjusted properly.
Adjusting Settings
Use these instructions to adjust the video settings to achieve the best
screen image.
Note:
These instructions use the Select, Up, and Down buttons on
the back panel of the monitor. For more information on the
location and operation of the controls on the monitor, refer
to Page 24.
Step 1 - Start the Adjustment Utility
1.
Insert the diskette provided with the monitor in the floppy drive of
the host computer.
2.
Start the Flat Panel Monitor Adjustment utility using the instructions
on the diskette label.
The utility displays an image on the screen to assist you in adjusting
the monitor settings.
Note:
The utility may take several seconds to display the
screen image.
Step 2 - Display the on-screen menu and verify workstation settings
1.
Press the Select button on the back panel of the monitor to display
the on-screen menu.
2.
Highlight the System option and press Select.
3.
Verify that you are running with the desired resolution and a vertical
refresh rate of 60Hz or 75Hz.
4.
If necessary, change the resolution or vertical refresh rate for the
workstation using Control Panel. Refer to Page 15.