64
Rockwell Automation Publication 871FM-UM002A-EN-P - April 2017
Chapter 10
Install the 871FM Sample Code Add-On Instruction
The updated values can be viewed by expanding the My_Output_Data tag.
Figure 2 - My_Output_Data
Change Operation State
To change the state of either Location Indicator, status indicator, between NO
and NC, Phy Mode, Lock simply toggle the associated bit in Msg_data AOI
control data array. The status can be viewed in the My_Output_Data tag.
IMPORTANT
For Timing and Counter functions, be sure that the functionality is enabled
within the AOP.