manualshive.com logo in svg

Rockwell Automation Allen-Bradley 856T-B24LC, User Manual, Page: 24 / 82

Share
Download
Rockwell Automation Allen-Bradley 856T-B24LC User Manual Download Page 24

24

Rockwell Automation Publication 856T-UM001B-EN-P - April 2021

Chapter 3          Configure the 856T-B24LC IO-Link Module

2. The module window pops up and shows the available modules. Use the 

filter to select 1734-4IOL module and click Create.

3. The IO-Link Configuration screen appears, click OK.

Close the selection popup window if still visible. 

4. The IO-Link Master can now be configured. To configure the device, a 

device-specific IODD (I/O Device Description) file is required. The 
following section shows how to register the IODD file.

Register the 856T-B24LC 

Module IODD File

To initialize a device on an IO-Link Master, register the IODD of the device. 
The IO Device Description (IODD) files contain the information that is related 
to the device, integrated into the system environment. There are three ways to 
get the IODD file:

•

The 856T-B24LC module has an embedded IODD that can be 
automatically loaded into Studio 5000. Customer does not need to 
register the IODD file.

•

The IODD file for the 856T-B24LC module can be downloaded from 

rok.auto/pcdc

 and loaded manually to Studio 5000.

•

The 856T-B24LC module IODD is available in the IODD finder section of 
the IO-Link.com website.

Summary of Contents for Allen-Bradley 856T-B24LC



















































































Reviews:

No comments