manualshive.com logo in svg

Rockwell Automation Allen-Bradley 856T-B24LC, User Manual, Page: 20 / 82

Share
Download
Rockwell Automation Allen-Bradley 856T-B24LC User Manual Download Page 20

20

Rockwell Automation Publication 856T-UM001B-EN-P - April 2021

Chapter 3          Configure the 856T-B24LC IO-Link Module

AOP Installation

Add-on Profiles are files that you add to your Rockwell Automation library. 
These files contain the pertinent information for configuring a device that is 
added to the Rockwell Automation network. The Add-on Profile simplifies the 
setup of devices because it presents the necessary fields in an organized 
fashion. The Add-on Profile allows for the efficient configuration of systems. 
The Add-on Profile is a folder that contains numerous files for the device. It 
comes as an installation package.

Before you start making a project in Studio 5000, verify that the proper and 
latest versions of the AOP files are installed. In this example, you need the AOP 
for 1734-AENTR (POINT I/O) and 1734-4IOL (IO-Link Master).

If the AOP is required to be downloaded and installed, you can find it at: 

download.rockwellautomation.com/esd/
download.aspx?downloadid=addonprofiles

Extract the AOP zip file, open the folder, and click the MPSetup.exe file.

Create Project

The following steps show how to create simple configuration with 856T-B24LC 
module.

To begin a new project in Studio 5000, follow these steps.

1. Click the Studio 5000 icon. In this example, version 32 of Studio 5000 is 

used.

2. Click New Project

Summary of Contents for Allen-Bradley 856T-B24LC



















































































Reviews:

No comments