Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC, User Manual Download

Page: 64 / 78

Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017

Chapter 5

Set Up the UEFI Utility

Hardware History

You can view various hardware parameters from the Hardware History menu. It
shows the total hours that the computer has been powered up, or runtime. It also
displays the minimum and maximum temperatures (in °C) over the entire
runtime.

All displayed values are read-only, and the time stamp is 24-hour clock.

Menu

Description

CPU
DIMM1
DIMM2
Vcore
MB

Same hardware temperatures as identified in Hardware Monitor; for more
information, see

page 50

Runtime Hours

The total hours that the computer has been powered up.

IMPORTANT:

Make sure that all writes to the drive are complete before you remove

the drive from the system to avoid the risk of data corruption.

Exit

Returns you to the main set-up screen; see

page 42

Summary of Contents for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,















































































Search results

Summary of Contents for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Reviews:

Related manuals for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Brands by name

Popular brands

Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,, User Manual

Search results

Summary of Contents for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Reviews:

Related manuals for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Brands by name

Popular brands